NU-RELICS 1973-1991 BLAZER/JIMMY TAILGATE
17383-100
Part # 17383-100
Product Options
Availability: 5 Business Days (ANY orders $500+ require a signature)
1973-1991 Blazer/Jimmy REAR Tailgate Power window kit. Kit comes with everything you need to convert your back glass to power.
Fits:
DISCLAIMER: Due to the Nature of Vehicle Manufacturing and the Aftermarket Auto Parts industry, there will Always be tolerance differences thru out many vehicles. Because of those differences we have made adjustment points on our kits, but they might also require more adjusting. Meaning one side door glass might be a little different than the other on adjusting. (TECHNICAL/MECHANICAL APTITUDE IS REQUIRED FOR INSTALLATION OF OUR KITS.)
1973-1991 Blazer/Jimmy REAR Tailgate Power window kit. Kit comes with everything you need to convert your back glass to power.
Fits:
- 1973-1991 Blazer/Jimmy
DISCLAIMER: Due to the Nature of Vehicle Manufacturing and the Aftermarket Auto Parts industry, there will Always be tolerance differences thru out many vehicles. Because of those differences we have made adjustment points on our kits, but they might also require more adjusting. Meaning one side door glass might be a little different than the other on adjusting. (TECHNICAL/MECHANICAL APTITUDE IS REQUIRED FOR INSTALLATION OF OUR KITS.)
| Item# | Status | Description | Qty. | Your Price | |
|---|---|---|---|---|---|
| 17383-100 | In Stock |
NU-RELICS: 1973-1991 Blazer/Jimmy Tailgate Power Window Unit with Motor |
ADD TO CART
|
Features
- MODEL SPECIFIC - bolt into original mounting holes
- Uses Stock Channels
- Works with the curved glass of the 1960's and 1970's
-
New ACI Motors
- Regulators are made on 1018 cold roll steel
- Bronze Oilite ® thrust bearings at pivots (Made in USA) to keep them lubricated
- 4130 Heat Treated gear plates for longer tooth life and better wear
- Multiple power window switch options.
-
New ACI Motor AMP Draws
| No Load amps | Low Load amps | High Load amps | Stall amps |
| 3 | 5 | 11 | 20 |
ACI Motors are Reverse Polarity
This means that the ground for the system must come out of the master switch. There are 2 poles on the motor - to make it operate,
you must put power to one side then ground to the other side - NOT to the motor case. This will result in the motor turning in one direction.
By swapping the wires from side to side, the direction will change.
Fuses or Circuit Breakers - 30 AMP
Most of our harnesses will come with an in-line 30 AMP fuse. If you prefer, a circuit breaker will work too.
You can hook your windows up to a varity of different power sources.
Some options are: Straight to the battery (Windows should not have any battery draw when not in use).
Find extra slot in fuse panel - tie in using the supplied fuse.
Pull power from the key-on side of the switch
Relays
In most cases, you will not need to use a relay to boost amperage to the motors. The switches and wiring we use can handle the amp draws.
If you are using old style 3 pole switches, a special relay is needed to reverse the polarity at the motor. These do not increase amperage,
they just swap the ground from side to side. we have these available (prewired). Call us at 336-699-8949 for assistance.
they just swap the ground from side to side. we have these available (prewired). Call us at 336-699-8949 for assistance.
Grease & Oil
1. On the regulator gear teeth and roller tracks, we recommend using a high temp automotive wheel bearing and chassis lubricant.
NLGI grade 2 is one option
NLGI grade 2 is one option
2. Avoid the older soap based lithium grease - it sets up hard in cold weather making the windows harder to move
3. A few drops of light weight oil in the pivot points will allow the Bronze Oilite ® bushings to work smoothly and reduce wear.
4. On fuzzy runs and weather stripping - some 3M Silcone spray can help with break in
5. Use Die-Electric grease or Tuner Lube on all terminals and connections. This protects against moisture and corrosion.
There are no featured galleries matching this product.
Reviews
Review Product
Nu-Relics 1973-1991 Blazer/Jimmy Tailgate
Appearance
Installation
Price / Value
Quality
join our
email listYou’ll be first to know about One Piece Products, projects, promotions and special events!
Be the first to add a review for this product
Review Product